Tech blog
Tech Blog Pylontech UP2500 with Victron MPPTs and Cerbo – cable
The CAN cable that comes with the Pylontech cable kit, battery end goes into RS485 on master battery, cut inverter end – white/brown to A1 & brown to B1; blue to CAN H & blue/white to CAN L.
SBO’s Help Sheet & FAQ for New Victron Users V9
Note 1: Victron’s website is a well laid out resource of manuals and information Note 2: Do not attempt to sell or install equipment without reading manuals Note 3: Read this document before calling Solar & Batteries Online for programming assistance Introduction...
Pylontech with Victron Compatibility
*Important Information* When connected to a Victron Multiplus / Quattro Inverter Charger or MPPT this Pylontech battery utilises DVCC ( Distributed Voltage & Current Control) to control the charge current. It is essential to use the CAN-bus connection of a...
How to Prepare your New House Build for Solar
Initial Considerations You should fit your build with the maximum solar capacity allowed on a single phase home (in most parts of Australia). This is 6.6kW of solar with a 5kW inverter, and is usually the best value per kW due to the way the rebate works. If you want...