Solar Quotes Australia Wide
Hybrid & Off Grid
Solar Systems
Solar Quotes

Call the sales team
0485 884 223
9am-5pm Mon-Fri EST
Call Now

Select Page

Victron EV Charger Charging Station Single (7.3kW)/ Three-Phase (22kW) (EVC300400300)

Original price was: $2,780.00.Current price is: $2,490.00.

EV Charging Station 22kW
Input voltage range (V AC) 170 – 265
Rated charge current 32A / phase
Nominal power 22kW
Current output range 6 – 32A
Wi-Fi standards 802.11 b/g/n (2.4Ghz only)
Self-consumption 15mA@230V
Configurable Max. Current 10-32A
Means to Disconnect External circuit breaker (40A recommended)
Configurable price/kWh calculator(Eur) Default setting: 0.13 (adjustable)
Control type Touch Screen, Web page, GX Device over Modbus TCP
Light Ring 55 light configurable light effects available
Protection External RCD is required
Operating temperature -25°C to +50°C
Storage temperature -40 °C to +80 °C
Humidity 95%, non-condensing
Data communication Modbus TCP over WIFI
Enclosure colour Blue (RAL 5012)
Power terminals 6-10 mm² / AWG 10-8
Protection category IP44
Ventilation not required
Weight 3 kg
Dimensions (h x w x d) 390 x 300 x 150 mm


EV Charging Station

The EV Charging Station has three phase and single-phase capabilities. It delivers maximum 22kW AC in three phase mode or 7.3kW in single phase mode.

Wi-Fi Communication: Wi-Fi: 802.11 b/g/n for configuration and monitoring.
The internal Wi-Fi module can be configured in Access Point mode or Station mode for both the initial setup
and monitoring.

LCD Touch Screen: It incorporates 4.3-inch LCD Touch Screen for monitoring and control.
Light Ring for fast viewing the device state.

Fully programmable RGB Light Ring around charging port, to quickly determine the device state.
It can be programmed from the web interface to display different light effects based on the current state
(disconnected, charging, charged etc.). The objective is to help the user see the current state from a distance.

Two working modes available:
Manual Mode to configure output current
Manual mode allows configurable output current between 6-32A.
The charging power is controlled in two ways: by using the slider on the LCD touch screen or by using its web
page. It allows to manually start or stop the charging process when a vehicle is connected to the charging
Automatic Mode to ensure maximum PV system efficiency
It detects when excess power is available and uses only that power to charge the vehicle.
Integration with GX devices
The EV Charging Station can be configured and monitored from the GX screen devices and Remote Console.
Integration with VRM
Several options are available in the VRM Portal: real time reports, custom reports for configurable time
periods, advanced functions such as remote firmware update.



There are no reviews yet.

Be the first to review “Victron EV Charger Charging Station Single (7.3kW)/ Three-Phase (22kW) (EVC300400300)”

Your email address will not be published. Required fields are marked *